Acrylic Primer Undercoat
Fleetwood Acrylic Primer Undercoat is a premium quality, low-VOC primer that produces a smooth, adhesion-efficient base for Fleetwood Acrylic topcoats. Designed for use on new and bare wood, plaster, hardboard, cement, brickwork and both internal and external surfaces, itโs a general-purpose primer thatโs trade-trusted. Conforming to EPD regulations with a VOC of just 7g/l, it is suitable for use in hospitals, care homes, schools and offices. Touch dry in 1-2 hours and ready for re-coating in 4 hours.
Fleetwood Acrylic Primer Undercoat is a water-borne combined primer and undercoat for professional painters. Available in Brilliant White and a selection of colours from the Fleetwood Tinting System, Acrylic Primer Undercoat creates a smooth, blemish-resistant base that produces a premium-quality finish. Quick-drying and low-odour, it's suitable for schools, hospitals, care homes, offices and homes, as well as external uses on masonry and timber.
The excellent opacity and adhesion make it a more eco-friendly option to solvent-based primers and undercoats and is particularly good for use under acrylic trim. With a coverage of up to 12mยฒ/ltr, it's an efficient paint, too, and can be reduced by up to 20% with plain water as required. Acrylic Primer Undercoat conforms to EU 2010 Directive (Cat A/d) 130g/l with a very low VOC of just 7g/ltr. Touch-dry in 1-2 hours and ready for re-coat in 4 hours.
Compliance
- Conforms to EU 2010 Directive (Cat A/d) 130g/l
- Environmental Product Declaration conforms to ISO 14025 & EN 158804
- Manufactured under the guidelines and requirements of ISO 9001:2015 quality & ISO 14001:2015 environmental management systems
Performance
- Water-based
- Designed for plaster, masonry and wood
- Internal and external use
- Suitable for use in clinical environments, including nursing homes, clinics, and hospitals
- Ideal for high-traffic locations
- Low VOC of 7g/l
- Touch-dry in 1-2 hours
- Re-coat ready in 4 hours, depending on temperature and humidity levels
- Colours include Brilliant White plus additional tones from the Fleetwood tinting system
- Available in a range of sizes
- Easy clean-up using soapy water
Indoor Air Quality
- Contains a maximum VOC of just 7g/l
- Conforms to EU 2010 Directive (Cat A/d) 130g/l
Capacity
- Coverage rate of up to 12mยฒ/l
- Suitable for new or previously painted interior paintable non-porous surfaces, including internal walls and ceilings
- Application using a brush, roller, spray and airless spray
- Can be reduced by up to 20% with water
- Will work with most spray equipment
- Recommendations for airless spray: minimum working pressure on paint of 140kg/cm2 (2000 Ibs/in2) with a spray tip size of 0.38mm to 0.46mm (15 - 18thou) spray tip angle 65ยฐ. Filter mesh 60.
Products Note
On-screen paint colour representations may vary from actual paint colours. Due to the higher level of dark pigment present in deep-hue colours, these may be less resistant to marking and/or burnishing.