Air + Eco Spec Undercoat
A viable alternative for slow-drying, high-odour oil-based paints, Fleetwood Air + Eco Undercoat is a water-borne base paint for interior and exterior applications. The quick-drying, low-VOC and low-odour formula makes it suitable for schools, hospitals, care homes and catering establishments. Touch-dry in 30 minutes; it's ready for topcoating within 2-4 hours and has outstanding stain-blocking properties. BREEAM, LEED and EPD compliant with a VOC of 15g/l.
Part of the advanced Air + Eco® Spec range, Fleetwood Air + Eco Undercoat is a trade-standard base coat with outstanding application and finish comparable to a traditional oil-based or solvent-borne paint. This water-borne paint is quick-drying and has far lower odour and VOC levels, making it suitable for interiors in sensitive spaces such as care homes, hospitals, schools, colleges, and catering outlets.
Fleetwood Air + Eco Undercoat is fully compliant with current BREEAM, LEED and EPD standards, as well as being independently tested for emissions. With a drying time of 30 minutes and outstanding stain resistance and adhesion qualities, the finish is flawless and improves the overall look of any topcoat applied to it. Available in a range of colours and Fleetwood Tints.
Compliance
- 2004/42/EC EU limit value for this product (cat.A/d WB): 130g/l (2010) This product contains max. 13.0g/l VOC.
- Complies with Toy Safety Directive (TSD) 2009/48/EC – EN 71-3: 2019
- BREEAM NC 2018, LEED v4.1 – Compliant
- EPD, according to ISO 14025 and EN 1580
- Manufactured under the auspices of ISO 9001:2015 quality & ISO 14001:2015 environmental management systems
- LEED AgBB (28 Days Emissions)
Indoor air quality
- VOC of 13.0g/l
- Tested under the regulations outlined in French Indoor Air Quality Decree No 2011-321 – Arrete April 201, achieving a rating of A+
- Conforms to EU 2010 Directive (Cat A/d) 130g/l
- Low odour formula means it can be used in high-traffic areas and private rooms in hospitals, schools, care homes and catering establishments
- Attained Indoor Air Comfort® rating
Capacity
- Application method by brush, roller, spray or airless spray
- Coverage of approximately 16m²/ltr
- Reduce by up to 20% as required, depending on the delivery method
- Touch-dry in 30 minutes, topcoat ready in 2-4 hours, depending on delivery method, temperature and humidity
- Designed for both indoor and outdoor use on wood, trim and metal.
- Will work with most spray equipment
- Recommendations for airless spray: a minimum working pressure on paint of 140kg/cm2 (2000 Ib/sq in) with a spray tip size of 0.38mm to 0.46mm (15 – 18thou) spray tip angle 65°. Filter mesh 60.
- Available in a range of colours and can be tinted using Fleetwood Tinting systems only.
Products Note
On-screen paint colour representations may vary from actual paint colours. Due to the higher level of dark pigment present in deep-hue colours, these may be less resistant to marking and/or burnishing.
