Bio Tec Two Pack Gloss
Suitable for clinical environments, Fleetwood Bio-tec 2 Pack Epoxy Gloss is a smooth-flowing gloss that incorporates advanced technology to inhibit the growth of bacteria, including MRSA and E.coli. This makes it an excellent choice for hospitals, care homes and medical environments where cleanliness is a priority. Fully compliant with EPD, BREEAM and LEED V4.1 specifications, it's a water-based paint with low odour and VOC that's touch-dry in 1-2 hours.
Fleetwood Bio-tec 2 Pack Epoxy Gloss is a robust, long-lasting gloss paint specifically designed for use in clinical locations such as hospitals, care homes, medical centres and clinics. Incorporated within the structure of the paint is a special combination of products that inhibit the growth of bacteria such as E.coli and MRSA, as well as a wipe-clean surface for better hygiene in high-traffic locations. The paint conforms to EPD, BREEAM and LEED V4.1 requirements and has also been tested under Japanese JIS Z 2801:2000 specifications for inhibiting bacterial growth.
Water-based and with a low VOC of 70g/l when combined with the hardener, the thicker consistency also produces a smoother surface with fewer drips or runs. Bio-tec 2 Pack Epoxy Gloss can cover up to 10m²/ltr, is touch-dry in 1-2 hours and is ready for recoat in 12-14 hours.
Compliance
- Conforms to EU 2010 Directive (Cat A/j) 140g/l
- Environmental Product Declaration conforms to ISO 14025 & EN 158804
- Manufactured under the guidelines and requirements of ISO 9001:2015 quality & ISO 14001:2015 environmental management systems
- LEED V4.1 certificate – Indoor Air Quality ( AgBB German standard – 21 days test emissions )
- Bio-tec 2 Pack Epoxy Gloss complies with the BREEAM NC 2018
- Tested under Japanese JIS Z 2801:2000?for the inhibition of bacterial growth, including E.coli and MRSA
Performance
- Water-based
- Touch-dry in 1-2 hours
- Recoat time: 18-24 hours
- Designed for walls and ceilings
- Inhibits the growth of MRSA – E.coli & Bacteria
- Produces a gloss finish with an easy wipe-clean surface
- Suitable for use in clinical environments, including hospitals and nursing homes
- Resistant to chemical attack
- Stain blocking technology
- Ideal for high-traffic locations
- BREEAM, LEED and EPD compliant
- Low VOC of 70g/l
- Contains no added lead
Indoor Air Quality
- Contains max VOC; 70 g/l – when combined with hardener
- Conforms to EU 2010 Directive (Cat A/j) 140g/l
Capacity
- Coverage rate of up to 16m²/l on non-porous surfaces
- Base and activator should be mixed at a ratio of 4:1 by volume
- Suitable for new or previously painted interior paintable non-porous surfaces, including internal walls and ceilings
- Application using a brush, roller, spray and airless spray
- Reduce first coat by up to 10% with water
- Will work with most spray equipment
- Recommendations for airless spray: minimum working pressure on paint of 140kg/cm2 (2000 Ibs/in2) with a spray tip size of 0.38mm to 0.46mm (15 – 18thou) spray tip angle 65°. Filter mesh 60.
Products Note
On-screen paint colour representations may vary from actual paint colours. Due to the higher level of dark pigment present in deep-hue colours, these may be less resistant to marking and/or burnishing.
